AC in a four-wheel vehicle, is slowly becoming a necessity. And function also can not be compromised again. hence if the car air conditioner did not work properly so the vehicle crew sometimes go awry. When you open the glass entrance of dust and fumes. Meanwhile, if closed, it will attack the musty flavor.
So to overcome the obstacles mentioned, there are short tips that can be done about it as an alternative prior to check your vehicle in the hands of experts. Previously there may be a number of disorders that can arise until the AC function can not work optimally. Disorders of the AC evaporator is usually due to clogged exhaust themselves and their causes are:
• Channel squashed or twisted rubber.
Waste water will turn up, when a channel full of water will overflow and out of the outlet channel has been completed although the clamps.
• gagged dirt.
Exhaust can be gagged mud because the ends of these channels are under the car. Channel was separated from the evaporator outlet pipe.
Now to deal with is as follows:
1. Prepare a Phillips screwdriver (+), and open the cover of the main pillars of the right and left are usually colored with matching interior.
2. Open the cover of the AC right and left with a screwdriver. Then switch off the air conditioner by opening the cover 2 screws. Then remove 8 screws and 4 cover the holder inlet and exhaust blower.
3. Open 13 screw cap bottom blower, do it carefully and do not be forced to pull out now.
4. Check and clean the lid with a dry cloth. Observe the tube being pinched, twisted or loose, then correct the position until no longer occurring disorders.
5. Make sure the compressor hose ends clean of dirt. then bundle back all components carefully.